Xiaomi Redmi Note 11
Specification
General
| Device Type | Smartphone |
| Model | Redmi Note 11 |
| Announced | 26 January, 2022 |
| Released | 09 February, 2022 |
| Status | Available |
| Price | 4GB 64GB ৳19,499/- BDT / 4GB 128GB 21,499/- BDT / 6GB 128GB 22,499/- BDT / 8GB 128GB 24,499/- BDT |
Network
| 2G Network |
GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G Network |
HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100 |
| 4G Network |
1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 40, 41 |
| SIM SIM (Subscriber Identity Module) is a small card that contains mobile network subscriber's account information. This allows the phone using the card to attach to a mobile network. The SIM card is most commonly associated with GSM and UMTS mobile networks. Moving a SIM card from one phone to another allows a subscriber to switch mobile phones without having to contact their mobile network carrier. SIM cards can also be used by a phone to store limited amounts of data, such as phone numbers and text messages. | Nano SIM |
| Dual SIM | Available |
Display
| Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor) | AMOLED capacitive touchscreen |
| Size | 6.43 inches, 99.8 cm2 (~84.5% screen-to-body ratio) |
| Resolution | 1080 x 2400 pixels, 20:9 ratio (~409 ppi density) |
| Display Colors Display Colors is refers to the number of different shades of colors that the screen is capable of displaying => 64K colors, 256K colors and 16 million colors, Obviously 16M is highest available range of colors and better than others. | 16M colors |
| Pixel Density Pixel Density (PPI) is refers to the concentration of pixels on a particular display, measured in pixels per inch (ppi). Pixel density is calculated by dividing the diagonal pixel resolution of a display by its diagonal size, higher pixel density better display quality. | 409 ppi, 90Hz, 700 nits, 1000 nits (peak) |
| Touch Screen | Capacitive Touchscreen, Multi-touch |
| Display Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind. | Corning Gorilla Glass v3 |
| Features |
@ Brightness: 1000 nits @ Refresh Rate: 90 Hz @ Notch: Punch-hole |
Camera
| Primary Camera is able to capture photographs and usually videos, The most important characteristics of a camera are the resolution (measured in megapixels), lens focus type (fixed or automatic), higher megapixel cameras are known to capture higher quality photos, but not always a good measurement of the photos quality. | 50 MP f/1.8, Wide Angle, Primary Camera, @ 8 MP f/2.2, Ultra-Wide Angle Camera, @ 2 MP f/2.4, Macro Camera, @ 2 MP f/2.4, Depth Camera |
| Image | 8150 x 6150 Pixels, Aperture f/1.8, Auto Flash, Face detection, Touch to focus, Movie Frame |
| Video | 1920x1080, 1280x720, 30 fps Video Recording |
| Flash Flash Light => There is commonly two types of flash lights are used in camera mobile phones, LED Flash (LED flash offers lower power consumption with drive circuitry that takes up very little room, LEDs can be strobed faster than any other light source), Xenon Flash (xenon flash produces an extremely intense full-spectrum white light for a very short duration) | LED Flash |
| Secondary | 13 MP f/2.4, Wide Angle, Selfie Camera, 1920x1080, 1280x720 Video Recording with 30 fps & Aperture f/2.4 |
Hardware
| Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming. | Qualcomm SM6225 Snapdragon 680 4G (6 nm) |
| CPU CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone. | Octa-core (4x2.4 GHz Kryo 265 Gold & 4x1.9 GHz Kryo 265 Silver) |
| GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion. | Adreno 610 |
| RAM (Memory) RAM (Random Access Memory) is a type of computer memory that can be accessed randomly, any byte of memory can be accessed without touching the preceding bytes that allows information to be stored and accessed quickly from random locations. RAM is the most common type of memory found in computer systems, smartphones, tablets and other electronic devices. | 4 GB |
| Internal Storage Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored. | 64/128 GB UFS 2.2 |
| Card Slot Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras. | microSDXC (dedicated slot) |
| Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device. | Fingerprint (side-mounted), Accelerometer, GYRO, Proximity, Compass |
Connectivity
| Bluetooth Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices. | 5.0, A2DP, LE |
| Infrared Infrared connectivity is an old wireless technology used to connect two electronic devices. It uses a beam of infrared light to transmit information and so requires direct line of sight and operates only at close range. | |
| Wi-fi Wi-Fi is a popular wireless networking technology using radio waves to provide high-speed network connections that allows devices to communicate without cords or cables, Wi-Fi is increasingly becoming the preferred mode of internet connectivity all over the world. | Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot |
| Wi-fi Hotspot | |
| USB | USB Type-C 2.0, USB On-The-Go |
| GPS GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky. | Yes, with A-GPS, GLONASS, GALILEO, BDS |
| NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches. | |
| Wireless Charging Wireless Charging (Inductive Charging) uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device. | Not Available |
Battery
| Capacity Battery Capacity is a measure (typically in Amp-hr) of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain conditions. | 5000 mAh |
| Placement | Non-removable Li-Po |
| Standby Standby Time is the total amount of time that you can leave your is fully charged, turned on and ready to send and receive calls or data transmissions before completely discharging the battery. | Fast charging 33W, 100% in 60 min (advertised) @ Power Delivery 3.0 Quick Charge 3+ |
Data
| GPRS GPRS (General Packet Radio Service) is a packet oriented mobile data service on the 2G and 3G cellular communication system's global system for mobile communications (GSM), Generally, GPRS is used for the purpose of wireless data transfer, such as sharing pictures and videos or browsing the Internet via a mobile phone connection. | |
| EDGE EDGE (Enhanced Data GSM Environment) is a wireless network technology generally considered the next step in the 2G network offers data transfer rates up to four times faster than ordinary GSM networks, Generally, EDGE is used for the purpose of wireless data transfer, such as sharing pictures and videos or browsing the Internet via a mobile phone connection. | |
| Speed | HSPA 42.2/5.76 Mbps, LTE-A (CA) |
Deep Analysis of the Xiaomi Redmi Note 11
Xiaomi Redmi Note 11 is a likely new smartphone, released on 09 February 2022 by Redmi China. Are you considering purchasing the Xiaomi Redmi Note 11 phone? Still, there are several features that you must know before buying this Redmi phone. It has 4 GB/ 6 GB RAM and 64 GB/ 128 GB internal storage with microSDHC (dedicated slot) card slot. Here are the details and features of this phone. And we will share the Bangladeshi price of Xiaomi Redmi Note 11 official and unofficial.
Design & Build Quality
The Xiaomi Redmi Note 11 features an elegant design and durable construction. It has a powerful 5000mAh battery with a 33W: 100 % in 60 minutes quick charging feature.
It has a four camera setup on the back. The back-side camera setup includes a 50 MP primary lens and a 13 MP front camera setup. The Redmi phone balances slimness with a solid build.
Body and Dimensions
The phone’s body and outer look are smart and smooth, as the brand usually does. The dimensions are 159.9 x 73.9 x 8.1 mm (6.30 x 2.91 x 0.32 in) and the weight is 179 g (6.31 oz). Build quality and body are protected by Corning Gorila Glass 3.
It has a 6.43 inches, 99.8 cm2 (~84.5% screen-to-body ratio) AMOLED capacitive touchscreen with 1080 x 2400 pixels, 20:9 ratio (~409 ppi density) resolution. A dual SIM slot with Nano-SIM is an available feature for Hybrid SIM (Nano-SIM, dual stand-by). The screen is protected by Gorilla Glass. The display features are 90Hz, 700 nits, 1000 nits (peak), and Waterdrop Notch.
Xiaomi Redmi Note 11 Price in Bangladesh 2025
The Xiaomi Redmi Note 11 Mobile Phone costs ৳19,499/- BDT Taka (4 GB RAM and 64 GB Internal Storage) in Mobile Phone shops in Bangladesh. The unofficial price of this phone is 15,000/- BDT only (4GB RAM and 64GB storage variant).
FAQs about Xiaomi Redmi Note 11
1. What is the expected price of the Xiaomi Redmi Note 11?
– The expected price is around ৳19,499/- BDT (4GB/ 64GB).
2. When is the release date of this phone?
– It has been released on 09 February 2022.
3. What is the price of an unofficial Xiaomi Redmi Note 11 phone?
– The Xiaomi Redmi Note 11’s Unofficial price in the Bangladeshi market is 15,000/- BDT
4. Which country and company made this phone?
– Redmi manufactured it and this phone is made in China.
5. Does this phone support 5G technology?
– No, the Redmi Note 11 smartphone doesn’t support 5G connectivity.
Reviews
Disclaimer Note
Please notice! we don't ensure that the data of this page is 100% accurate and updated.
