Oppo A3 4G
Specification
General
| Device Type | Smartphone |
| Model | Oppo A3 4G |
| Announced | 20 August, 2024 |
| Released | 03 October, 2024 |
| Status | Available |
| Price | 6GB 128GB ৳20,990/- BDT |
Network
| 2G Network |
GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G Network |
HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100 |
| 4G Network |
LTE |
| SIM SIM (Subscriber Identity Module) is a small card that contains mobile network subscriber's account information. This allows the phone using the card to attach to a mobile network. The SIM card is most commonly associated with GSM and UMTS mobile networks. Moving a SIM card from one phone to another allows a subscriber to switch mobile phones without having to contact their mobile network carrier. SIM cards can also be used by a phone to store limited amounts of data, such as phone numbers and text messages. | Nano SIM |
| Dual SIM | Yes, Available |
Display
| Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor) | IPS LCD |
| Size | 6.67 inches (16.94 cm) |
| Resolution | 720x1604 px (HD+) |
| Pixel Density Pixel Density (PPI) is refers to the concentration of pixels on a particular display, measured in pixels per inch (ppi). Pixel density is calculated by dividing the diagonal pixel resolution of a display by its diagonal size, higher pixel density better display quality. | ~264 |
| Touch Screen | Capacitive Touchscreen, Multi-touch |
| Display Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind. | Gorilla Glass |
| Features |
@ Brightness: 1000 nits @ Refresh Rate: 90 Hz @ Notch: Punch-hole |
Camera
| Primary Camera is able to capture photographs and usually videos, The most important characteristics of a camera are the resolution (measured in megapixels), lens focus type (fixed or automatic), higher megapixel cameras are known to capture higher quality photos, but not always a good measurement of the photos quality. | 50 MP, f/1.8, Wide Angle, Primary Camera, Auxiliary lens |
| Image | 8150 x 6150 Pixels |
| Video | 1920x1080, 1280x720 |
| Flash Flash Light => There is commonly two types of flash lights are used in camera mobile phones, LED Flash (LED flash offers lower power consumption with drive circuitry that takes up very little room, LEDs can be strobed faster than any other light source), Xenon Flash (xenon flash produces an extremely intense full-spectrum white light for a very short duration) | Auto Flash, Face detection, Touch to focus |
| Secondary | 5 MP, f/2.2, Wide Angle, Primary Camera, 1920x1080, 30 fps |
Hardware
| Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming. | Qualcomm Snapdragon 6s Gen 1 |
| CPU CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone. | Octa-core (2x 2.3 GHz Cortex-A78 & 6x 2 GHz Cortex-A55 ) |
| GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion. | Adreno 610 |
| RAM (Memory) RAM (Random Access Memory) is a type of computer memory that can be accessed randomly, any byte of memory can be accessed without touching the preceding bytes that allows information to be stored and accessed quickly from random locations. RAM is the most common type of memory found in computer systems, smartphones, tablets and other electronic devices. | 6 GB |
| Internal Storage Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored. | 128/256 GB, Variant: 4GB 128GB / 6GB 128GB / 6GB 256GB / 8GB 128GB / 8GB 256GB |
| Card Slot Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras. | microSDXC |
| Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device. | Fingerprint (side-mounted), Accelerometer, Proximity, Compass |
Connectivity
| Bluetooth Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices. | v5.0, A2DP, LE |
| Infrared Infrared connectivity is an old wireless technology used to connect two electronic devices. It uses a beam of infrared light to transmit information and so requires direct line of sight and operates only at close range. | |
| Wi-fi Wi-Fi is a popular wireless networking technology using radio waves to provide high-speed network connections that allows devices to communicate without cords or cables, Wi-Fi is increasingly becoming the preferred mode of internet connectivity all over the world. | Wi-Fi 802.11 a/b/g/n/ac, dual-band |
| Wi-fi Hotspot | |
| USB | USB Type-C 2.0, OTG |
| GPS GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky. | GPS, GALILEO, GLONASS, BDS, QZSS |
| NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches. | |
| Wireless Charging Wireless Charging (Inductive Charging) uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device. | Not Available |
Battery
| Capacity Battery Capacity is a measure (typically in Amp-hr) of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain conditions. | 5100 mAh |
| Placement | Non-removable Li-Po |
| Standby Standby Time is the total amount of time that you can leave your is fully charged, turned on and ready to send and receive calls or data transmissions before completely discharging the battery. | 45W wired, PD2.0, PPS, 50% in 30 min (advertised) |
Data
| GPRS GPRS (General Packet Radio Service) is a packet oriented mobile data service on the 2G and 3G cellular communication system's global system for mobile communications (GSM), Generally, GPRS is used for the purpose of wireless data transfer, such as sharing pictures and videos or browsing the Internet via a mobile phone connection. | |
| EDGE EDGE (Enhanced Data GSM Environment) is a wireless network technology generally considered the next step in the 2G network offers data transfer rates up to four times faster than ordinary GSM networks, Generally, EDGE is used for the purpose of wireless data transfer, such as sharing pictures and videos or browsing the Internet via a mobile phone connection. | |
| Speed | HSPA, LTE |
Deep Analysis of the Oppo A3 4G
Oppo A3 4G is a likely new smartphone, released on 03 October 2024 by Oppo China. Are you considering purchasing the Oppo A3 4G phone? Still, there are several features that you must know before buying this Oppo phone. It has 4/6/8 GB RAM and 128/256 GB internal storage with microSDHC (dedicated slot) card slot. Here are the details and features of this phone. And we will share the Bangladeshi price of Oppo A3 4G official and unofficial.
Design & Build Quality
The Oppo A3 4G features an elegant design and durable construction. It has a powerful 5100mAh battery with a 45W wired, PD2.0, PPS, 50% in 30 min (advertised) quick charging feature.
It has a dual camera setup on the back. The back-side camera setup includes a 50 MP primary lens and a 5 MP front camera setup. The Oppo phone balances slimness with a solid build.
Body and Dimensions
The phone’s body and outer look are smart and smooth, as the brand usually does. The dimensions are 165.8 x 76.1 x 7.7 mm (6.53 x 3.00 x 0.30 in) and the weight is 186 g (6.56 oz). Build quality and body are protected by Gorila Glass.
It has a 6.67 inches, 107.2 cm2 (~85.0% screen-to-body ratio) IPS LCD capacitive touchscreen with 720 x 1604 pixels, 20:9 ratio (~264 ppi density) resolution. A dual SIM slot with Nano-SIM is an available feature for Hybrid SIM (Nano-SIM, dual stand-by). The screen is protected by Gorilla Glass. The display features are 90Hz, 1000 nits (HBM), and Waterdrop Notch.
Oppo A3 4G Price in Bangladesh 2025
The Oppo A3 4G Mobile Phone costs ৳20,990/- BDT Taka (6 GB RAM and 128 GB Internal Storage) in Mobile Phone shops in Bangladesh. The unofficial price of this phone is 17,000/- BDT only (6GB RAM and 128GB storage variant).
FAQs about Oppo A3 4G
1. What is the expected price of the Oppo A3 4G?
– The expected price is around ৳20,990/- BDT (6GB/ 128GB).
2. When is the release date of this phone?
– It has been released on 03 October 2024.
3. What is the price of an unofficial Oppo A3 4G phone?
– The Oppo A3 4G’s Unofficial price in the Bangladeshi market is 17,000/- BDT
4. Which country and company made this phone?
– Oppo manufactured it and this phone is made in China.
5. Does this phone support 5G technology?
– No, the Oppo A3 4G smartphone doesn’t support 5G connectivity.
Reviews
Disclaimer Note
Please notice! we don't ensure that the data of this page is 100% accurate and updated.
